avocor technologies

Product SupportAvocor i7 OPS PC more information

Question:How to connect to the WCD using a HDMI connectionAdded June 11, 2019


In addition to an HDMI connection, a USB touch connection is required when connecting an external PC.
1. Connect the enclosed HDMI cable to the HDMI port of the touchscreen and to the external PC.
2. Connect the enclosed USB cable to the corresponding touch USB port (USB-B Type 3) of the touchscreen and to the USB port (USB-A) on the external PC.
3. Using the Remote Control select the HDMI source button or press the Source Button (see operating buttons) on the Front Connection bar to select HDMI.

Connecting to the WCD usin a HDMI port and a USB cable to enable touch

This display supports the VESA Display Data Channel (DDC) standard. This standard provides “Plug and Play” capability; the display and a VESA DDC-compatible computer communicate their setting requirements, allowing for quick and easy setup.
In order for Plug and Play to work correctly, you must turn on the display before you turn on the connected computer.

We recommend using a USB cable that is no longer than 5 metres.

Telephone Support

Head Office / Support: 1-855-268-7999

EMEA / Support: +44 (0)333 300 3474